Bosch 1677M 7-1/4-inch 120V Wormdrive Saw

Bosch 1677M 7-1/4-inch 120V Wormdrive Saw Review

Bosch 1677M 7-1/4-inch 120V Wormdrive Saw Feature

• Left side blade design - Unmatched line of sight and blade visibility
• Powerful 15 Amp
• All ball-bearing motor with worm drive gear train
• Die cast magnesium footplate ? For greater strength
• Anti-snag lower guard ? To minimize snagging in wood

15A Powerful All Ball Bearing Motor, Worm Drive Saw, Worm Drive Gear Train, Ultimate Durability & Maximum Tool Life, Built In Saw Hook, Easy Storage While You Work Light Weight Magnesium Motor Housing Magnesium Footplate With Waffle Design, For Greater Strength & Stability Anti Snag Lower Guard Reduces Hang Ups When Making Narrow Cut Offs Left Side Blade Design, Clear View Of Blade & Cut Line Large Adjustment Levers, Fast, Accurate Bevel & Depth Adjustments 50 Degree Bevel Capacity With Positive Stop At 45 Degree Soft Grip Handle.

Makita JR3060T 12 Amp Reciprocating Saw

Makita JR3060T 12 Amp Reciprocating Saw Review

Makita JR3060T 12 Amp Reciprocating Saw Feature

• "Tool-Less" blades change for easy blade and shoe adjustment.
• Powerful 12.0 amp motor for continuous operation.
• All ball and needle bearing construction for longer tool life.
• Variable speed for precise cutting in a variety of materials.
• Externally accessible brushes for easier maintenance.

Tool-less blade change and shoe adjustment. 12-amp motor for continuous operation. Large variable speed trigger switch with lock-on button. Internal dust blower system clears debris from the line of cut for better visibility and accuracy. All ball and nee dle bearings for longer tool life. STANDARD EQUIPMENT: 1 each blade Nos.723054-A and 723066-A, plastic tool case. SPECIFICATIONS: 12-amp, 120V, 1-1/4" length of stroke, 0-2,800 strokes per minute. 19-1/8" overall length, 9.3 lbs. net weight.

QEP 60088 7-Inch Portable Tile Saw with Water Cooling System

QEP 60088 7-Inch Portable Tile Saw with Water Cooling System Review

QEP 60088 7-Inch Portable Tile Saw with Water Cooling System Feature

• UL approved, 3/4 HP, 5 amp, 120 volt, direct-drive motor
• Includes a 7 inch continuous rim wet diamond blade
• Includes laser cutting guide for accurate cutting paths
• Large steel cutting table to support large tiles
• Adjustable rip, angle and tilt-up table for accurate cuts

The 60088 7-Inch Portable Tile Saw with laser cutting guide is a small, but remarkably powerful saw that is ideally suited for the "small-job" contractor or serious DIY'er. It comes with a 7-inch continuous rim diamond blade for cutting ceramic tile, slate, marble and granite. This saw will also cut porcelain tiles if a porcelain rated blade (not included) is used. The UL approved, full 3/4 HP, 120 volt motor is powerful enough for quick and repeat cuts, with automatic thermal overload protection to prevent overheating. Adjustable angle and rip guides plus a tilt-up table for 15, 30, and 45 degree miter cuts provide the versatility required for intricate installations. It offers many of the same features found in larger saws, but is perfect for those small work spaces like bathrooms and kitchens.

JET JHM-610 Hobby Mill

JET JHM-610 Hobby Mill Review

JET JHM-610 Hobby Mill Feature

• Cast iron design for vibration free operation
• Powerful 150W DC-motor
• Electronic variable speed with 2-step gear box
• Left hand spindle rotation allows for tapping
• 45 degrees right/left tilt tablecolumn for flexible work

Boasting all of the functions of a large mill but in a small package, the Jet 350200 JHM-610 hobby mill is ideal for hobbyists, DIYers, and professionals. It offers a 150-watt DC motor to effectively shape and drill metal and other solid material, and its electronic variable speed is controlled by a two-step gear box. It's backed by a two-year limited warranty.

Ideal for hobbyists, DIYers, and professionals.

JHM-610 Hobby Mill At a Glance: Electronic variable speed with 2-step gear box Left-hand spindle rotation allows for tapping Compound table precision machined with adjustable dovetail guides Two-year limited warranty

Features

Running a powerful 150-watt DC motor, the Jet 350200 JHM-610 hobby mill has a cast-iron design for vibration-free operation. The compound table is precision-machined with adjustable dovetail guides. The left-hand spindle rotation allows for tapping, while the table column tilts 45 degrees to the left or right for maximum flexibility. Other features include a micro adjustable spindle downfeed, draw bar, drilling and milling guard, and keyless chuck with MT2 arbor.

Specifications Motor: 150-watt DC Spindle speed: Electronic variable speed with 2 gear ranges Spindle taper: MT2/M10 Maximum spindle distance to table: 8-1/4 inches Table longitudinal travel: 7-1/2 inches Spindle speed range: low 100-1,000 rpm; high 100-2,000 rpm Table size: 5-3/4 inches by 9-1/2 inches Dimensions: 17.75 inches by 21.5 inches by 24.75 inches Weight: 124 pounds Warranty: 2 years, limited

Includes JHM-610 Hobby Mill - 350200

Forrest WW07Q307100 Woodworker II 7-1/4-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade

Forrest WW07Q307100 Woodworker II 7-1/4-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade Review

Forrest WW07Q307100 Woodworker II 7-1/4-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade Feature

• Forrest Saw Blades dampener helps kill saw scream-whistle from a vibrating blade surface.
• Dampen out motor and belt vibrations from being transmitted up to the rim of the teeth.
• Greatly reduce cutting noise.
• Hold blade rigid and true for better cuts on your machine.
• Are hardened and precision ground flat within .001" to keep your blade true.

With this all purpose blade for tables saws you can rip and crosscut 1" - 2" rockhards and softwoods resulting in a smooth-as-sanded surface. With 20 DEG face hook, ply-veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut). Ends second-step finishing. Ends cutting 1/16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3, (24T rip, 50T combination, 80T crosscut).

Earthwise PS40008 8-Inch 6 amp Electric Telescopic Pole Saw with 3-Position Head and 10-Foot Reach

Earthwise PS40008 8-Inch 6 amp Electric Telescopic Pole Saw with 3-Position Head and 10-Foot Reach Review

Earthwise PS40008 8-Inch 6 amp Electric Telescopic Pole Saw with 3-Position Head and 10-Foot Reach Feature

• 8-Inch Oregon bar and chain
• 3 position adjustable head
• Telescopic extention pole to 10.2-feet
• Automatic chain tension and oiling
• Telescoping adjustable handle

Earthwise 8" Corded Electric Pole Saw. High - up trimming job? Earthwise puts it in easy reach! No need for the ladder. The 8" Corded Pole Saw from Earthwise cuts big tasks down to size, with adjustable length, cutting angles, and a powerful 6-amp motor. Unbelievable power for its size, and at only 12 lbs., it's a cinch for anyone to use! Curb appeal: Telescoping, with a 9'6" fully-extended length; 3-position head: straight, 15, and 30; Powerful, efficient 6-amp motor; Sharp, reliable 8" Oregon chain and bar; Lightweight fiberglass pole with auxiliary handle for 360 rotation; Automatic bar and chain tension adjustments; Cord retention hook; 60Hz. Requires standard 120V power.; Order yours today! Please Note: Once item has contained gas, kerosene, butane, diesel, or oil it cannot be returned without calling for inspection instructions. WARNING: This item cannot be shipped to Canada. Please check your State, County and City laws for restrictions before ordering this product. Earthwise 8" Corded Electric Pole Saw

Milwaukee 6480-20 15 Amp 8-Inch Complete Panel Saw System with 50-Inch Crosscut

Milwaukee 6480-20 15 Amp 8-Inch Complete Panel Saw System with 50-Inch Crosscut Review

Milwaukee 6480-20 15 Amp 8-Inch Complete Panel Saw System with 50-Inch Crosscut Feature

• 8-inch panel saw system with a powerful 15 amp (3-1/4 max hp) Milwaukee motor (AC/DC)
• Cutting accuracy to within 1/32-inch in either cross-cutting or ripping directions
• Rigid all steel frame, square tubing is electrically welded to prevent warping or twisting; 20 amp commercial-grade paddle switch
• Includes circular saw blade and blade wrench
• Weighs 175 pounds shipped; 5-year warranty

Milwaukee's 8-inch panel saw is an ideal tool for lumber yards, because it offers a quick and easy solution to cutting up to 4 by 8-foot sections of sheet goods to size. This unique saw has a cutting accuracy to within +/- 1/32 inch and a material thickness capacity of up to 1-3/4 inch. The saw also features an innovative horizontal handle for convenient on/off saw operation as well as a 20 amp commercial-grade paddle switch for long life.

The 6480-20's frame is made from tough, electrically welded steel to ensure it won't warp or twist. The powerful 15 amp motor is mounted on a carriage that moves horizontally with minimal effort on graphite-impregnated nylon roller bearings which require no lubrication. The saw can also be turned 90 degrees and fixed to make vertical cuts. Horizontal and vertical scales provide quick and accurate cuts. The workpiece can be loaded from either the left or right side and it gently rolls through the saw on a smooth acting roller mechanism. The panel saw is not recommended for ripping panels larger than 4 by 8 feet. The extension kit accessory, 49-22-8108, is recommended for cutting sheet goods over 6 feet long. The perfect tool for lumber yards, building contractors, building material suppliers, cabinet shops, remodelers, sign shops, rental outlets Features: *Cut up to 4' x 8' sections of paneling to size *All steel frame, square tubing is electrically welded - will not warp or twist *Innovative horizontal handle for convenient On/Off operation *Heavy-duty commercial-grade paddle switch for durability and long life *Cutting accuracy to within 1/32" in either crosscutting or ripping directions *Powerful 15 Amp Milwaukee built motor *Retractable counter-weight assists in smooth pull down and return of saw carriage *Power unit can be easily changed from crosscutting to ripping *Smooth acting roller mechanism allows heavy material to gently roll through machine *Saw carriage moves up and down on graphite impregnated nylon roller bearings, which require no lubrication Specifications: *Rating: 120V AC / DC *Horsepower: 3-1/4 HP Max *No-load RPM: 5,800 *Blade Size: 8-1/4" *Arbor Size: 5/8" *Max Cut: 1-3/4" Dimensions: *70"H x 60"W *Weight: 170 lbs.